Measuresoft IMP Viewer and OPC Data Access and Excel RTD Server

The Measuresoft IMP server is an OPC Data Access and Excel RTD Server for the Solartron IMP range.

The Measuresoft IMP Server comes equipped with desktop configuration and monitoring tools, making network setup an effortless task. Setting up the IMP network, modules and channels is straightforward and user friendly.

Configuration is then used by the server to issue commands to the S-Net via a special interface installed in the PC, which initiates measurement of nominated channels. During the scanning operations, the Measuresoft IMP server manages all aspects of IMP and S-Net communications, initializing & programming the IMPs, commanding them to take measurements, receiving the incoming channel data and constantly monitoring the system for errors.

Features

Key Benefits

Compatible with both legacy(XP) and current version of Windows 32-bit and 64-bit versions are available.

Compatible with the OPC Data Access v1.0 and v2.0 standards.

Compatible with the Excel RTD standard.

Compatible with 3595-4A/4B/4C plug-in cards, 3595-4U USB S-Net interface and 3595-9X Series Ethernet Interfaces.

Support multiple S-Nets on a single PC using multiple 3595-4U USB S-Net interfaces.

Interrogation of IMP S-Net network for module and reading of configuration from S-Net.

Connects third party systems to Solartron S-Net.

Allows you to use Excel as data monitoring tool.

Eliminates the requirement for custom programming of your software or replacement of your software.

Allows you to support Solartron Imp hardware on modern PC platforms into the future without major investment in replacement hardware.

Slow and fast acquisition speeds Integeration time.

Temperature result setting.

Calibration polynomials.

Diagnostic channels and debug output for monitoring S-Net communications.

Full traceability of all configuration changes to IMP OPC server.

Dynamic recofiguration of IMP channels e.g. modes tags etc without having to stop OPC clients.

Support for 3595-1A/1B/1C/1D/1E/1H/1Q1/2A and 2B IMP module types and all associated measurement modes.

  • 3595-1A IMP – 20 Channel Analog FET
  • 3595-1B IMP – 10 Chanel Strain Gauge
  • 3595-1C IMP – 20 Channel Analog Reed Relay
  • 3595-1C1 IMP – 20 Channel Analog Reed Relay
  • 3595-1D IMP – 4 Channel Analog
  • 3595-1E IMP – 20 Channel 500 Volt Isolation
  • 3595-1H IMP – 20 Channel Universal
  • 3595-1Q1 IMP – 20 Channel Universal
  • 3595-1J IMP – 20 Channel Universal with 500 Volt Isolation
  • 3595-2A IMP – 20 Channel Digital Input/Outputs
  • 3595-2B IMP – 32 Channel Digital Status/Events Input/Outputs